When water comes out of the distribution tube too fast, it does not allow the water to cascade down the evaporator, instead splashes over the water curtain. Ice will not form properly or efficiently when this happens, luckily there are 2 ways to fix this issue.
The first fix is to simply apply a clamp to the molded tubing running from the water pump to the distribution tube. This will slow the water flow and allow the water to exit the distribution tube properly. Another option is to simply replace the water pump.
Most Q Series Manitowoc ice makers and older use only 2 different pumps. There is a 115v water pump and a 208-230v water pump, that will work in most cases. If you have an S Series Manitowoc ice maker then your water pump will be different, depending on which model number you have. You can purchase both pumps for just $222.18 from IceMakerPartsShop.com
115v Water Pump - $222.18
208-230v Water Pump - $222.18
Manitowoc water pumps are another commonly replaced item on an ice machine. Over time they can either lock up or, as hard as it is to believe ... icemakerpump.blogspot.com
ReplyDeleteVery excellent blog. I read this have fruitful content and helpful for us. Thanks for publishing this blog.
ReplyDeleteUnifrost Food Service Equipments is best commercial kitchen equipment supplier and best Ice machine repair service provider in Delhi.